CB accessories
Microphones
Loudspeaker microphone
Art.no. 70061
With installed switchable loudspeaker
Ready-to-connect upon delivery, complete with 4-pin plug.
Electret microphone suitable for stabo xm 3200/3400/ 3044 / 3082
UP/DOWN microphone
Art.no. 70053
For crystal clear communication
This microphone provides a pervasive, far-reaching but natural modulation. Channel selection through UP/DOWN keys. Handy, attractive design. With 6-pin plug.
For stabo xm 3003/3003e/3003e 12/24V and stabo xm 5003
Spare microphone
Art.no. 70055
With electret capsule
Ready-to-connect upon delivery, complete with 4-pin plug. Power supply through microphone plug.
Suitable for CB radio sets stabo xm 3200/3400/ 3044/3082/4082.
Spare microphone
Art.no. 70052
With dynamic capsule
Ready-to-connect upon delivery, complete with 4-pin plug.
Suitable for many xm and xf CB radio sets and stabo magnum.
Schwanenhals-Mikrofon VOX
Art.no. 71565
Noise-cancelling electret microphone
suitable for connection
to 6-pin microphone socket.
Only for use with activated VOX.
stabo voxmic 100
Art.no. 71564
VOX system for CB radio with 6-pin plug
for stabo xm 3003/3003e/5003/5006e
stabo voxmic 104
Art.no. 71566
VOX system for CB radio with 4-pin plug
für/ for stabo xm 3044/3082
stabo VOX_optimike
Art.Nr.: 71567
DSP (digital signal processor) with ANC (active noise reduction)
for all stabo CB-radios without VOX-function with 6-pin mic-socket
(except stabo xm5003e)
Loudspeakers
HP2
Art.no. 70047
Large and strong
A powerful sound through more volume is promised by the big brother of CBL 500. Swiveling mounting bracket, load 5 W, Impedance 8 ohms
Front approx. 115mm x 65mm
CBL 500
Art.no. 70048
Small, clear and loud
Additional external loudspeaker for all stabo CB mobile and stationary radio sets. Playback optimized for radio operation. Compact and rugged design with swiveling mounting bracket. Load 5 W, Impedance 8 ohms
Front approx. 65mm x 65mm
Antenna accessories
Antenna base DV 27
Art.no. 60030
Solid antenna base for permanent single-hole mounting in the car body.
With slotted screw.
SPA-01
Art.Nr.: 40532
Künstliche Masse
zum Betreiben von CB-Antennen an Fahrzeugen mit Kunststoff-Karosserie.
Mirror support
Art.no. 60022
Practical support for mounting the mobile antenna on the bracket of exterior mirrors. Mounting is done without drilling.
For Ø 11-28 mm.
Clamp base for roof groove
Art.no. 60023
This clamp base is used to quickly and securely attach the mobile CB antenna to the roof groove of the vehicle.
President TOS 1
Low-cost SWR meter
Art.no. 50004
Mini SWR meter for checking the antenna matching for all 80 channels in the CB range.
SWR measuring range of 1:1 to ∞ | Frequency range 26 – 30 MHz | Load capacity of up to max. 100 W
Plugs
HF plug PL-259T
Art.no. 00510
Coaxial plug in UHF standard for cables with a diameter of up to 9 mm, Teflon insulation
PL SAP/FME
Art.no. 00523
Angled connector in UHF standard. One connector as UHF plug, the other one as SAP/FME jack.
HF plug PL-259/6
Art.no. 00511
Coaxial plug in UHF standard for cables with a diameter of up to 6 mm, Teflon insulation
PL-259/6 angled connector
Art.no. 00513
Angled connector in UHF standard for cables with a diameter of up to 6 mm
PL SAP/FME plug
Art.no. 00512
in UHF standard.
One connector as UHF plug, the other one as SAP/FME jack.
Adapter TNC/PL
Art.no. 61604
This adapter is attached to a TNC antenna jack of the handheld radio sets belonging to series SH 8000/xh 80….
A PL-259 plug acc. to UHF standard can be connected to the other end.
Angled HF connector M-359
Art.no. 00516
Angled connector in UHF standard. One connector as UHF jack, the other one as UHF plug. For instance for connecting antenna cables to the antenna jack without bending.
Connection coupling PL-258
Art.no. 00514
Coaxial connection coupling, jacks in UHF standard for PL-259 plugs on both sides
Coaxial cable
Coaxial cable RG213/U,100 m
Art.no. 00538
Low loss and extremely rugged coaxial cable in a low cost 100m ring, attenuation of 3.6 dB only over 100 m at 28 MHz, exterior diameter 10.3 mm.
Coaxial cable RG58 C/U, 100 m
Art.no. 00541
Very flexible and fine coaxial cable in a low cost 100m ring, particularly suitably for indoor cabling or antenna connections in vehicles, attenuation 8 dB over 100 m at 28 MHz, exterior diameter 5.8 mm only.
Coaxial cable RG58 C/U, 0.5 m, plug-in type
Art.no. 61524
For a fast connection between radio set and antenna or SWR meter. Delivered ready to plug-in with two PL-259 plugs, coaxial cable type RG58 C/U, length 0.5 m
Errors and technical modifications reserved, design deviations possible.
Have you still not found what you are looking for?
If you do not find your desired spare or accessory part here, please send us your request and we will see if there is anything what we can do for you!